Face Material:
Type | Smooth Paper |
Colour and Finish | White |
Weight | 70 g/m² ±10% ISO-536 |
Thickness | 88 μ ±10% ISO 534-80 |
Adhesive:
Super permanent rubber based hot-melt adhesive. Good adhesion to a wide variety of substrates and to non-polar surfaces (es. PP and PE). Designed for application where very high initial adhesion is required. Excellent behaviour in runnability and labels converting. Good performance at low temperature.
Reference | FH21 |
Type | Rubber permanent |
Min. Appl. Temp. | 0°C |
Service Temp. | -40°C/+60°C |
Shear | Medium |
Tack | 14 N/25mm FINAT FTM9 |
Final Adhesion | 9 N/25mm FINAT FTM2 |
This adhesive meets the demands of the reg. n° 1935/2004 and 10/2011 as well. It may stand in direct contact with dry and moist non-fatty foods
Liner:
Type | One side siliconised clay coated Kraft |
Colour and Finish | White |
Weight | 82 g/m² ±10% PP-032 - ISO 536 |
Thickness | 82 μ ±10% ISO 534 |
Transparency | n.a. % DIN 53 147-64 |
WK 80 Kraft- 1 sided clay-coated kraft backing for good lay flat properties.
Properties | Result |
Grammage | 80 gsm |
Caliper | 84 microns |
24 months, applicable only to the material delivered by Ritrama which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 22°C ± 2°C and 50 ± 5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.